Atualizações da empresa, anúncios de produtos e outras notícias relacionadas à Vortex.
Veja os produtos Vortex em ação e confira animações detalhadas que destacam seus recursos.
Saiba como os produtos da Vortex estão sendo utilizados em uma ampla variedade de aplicações.
Uma análise detalhada de projetos que utilizam nossos produtos e outros temas do setor.
Definições e descrições de termos comumente utilizados no setor de sólidos a granel.
Agende hoje mesmo uma demonstração virtual ou presencial com um especialista da Vortex.
Baixe informações sobre tamanhos e modelos dos produtos Vortex.
Baixe os manuais de instruções dos seus produtos Vortex.
A Vortex é especializada no projeto e na fabricação de componentes utilizados para transportar e controlar o fluxo de materiais sólidos a granel.
A Vortex lida com uma ampla variedade de materiais e conta com mais de 150 anos de experiência acumulada no manuseio de sólidos a granel secos.
A Vortex é associada a diversas organizações do setor e mantém parcerias com várias publicações e parceiros online.
Perguntas que recebemos com frequência sobre nossas comportas deslizantes, desviadores, bicos de carregamento e outras aplicações de manuseio de granéis sólidos.
Acreditamos que uma força de trabalho talentosa e diversificada é um dos fatores-chave para o sucesso da Vortex. Saiba mais sobre as oportunidades disponíveis.
Receive wood chips and saw dusts from a screener above, then divert them toward two destinations.
The Vortex Titan Rounded Blade Diverter is a combination of two Vortex Rounded Blade Gates. The Rounded Blade Diverter features independent actuation for each blade.
Divert raw grain materials from one source toward three destinations, to be pelletized for animal feed.
Two slide gates were required: one below a gain-in-weight filter receiver, and the other below a loss-in-weight feeder.
Discharge batches of dry calcium carbide from one pressurized holding vessel into another. The batch is then fed into a reactor, where it is mixed with water to produce acetylene gas.
The client sourced a Vortex Orifice Gate for use on a carbon black extrusion line. In order to create plastic pellet, the client fills a bag dump station with carbon black.
Source a solution that best prevents in-line contamination. Provide more access to the diverter’s internal, to better accommodate frequent wash-down and improve ease of in-line maintenance
Dynamic Bulk Systems, Inc. (DBS) – a Vortex equipment representative located in Fenton, Missouri, USA – provides one of the world’s leading pasta producers with bulk material handling solutions.
Two independent Roller Gates sharing a common side frame with two 16×30″ blades and special service inlets.
The customer currently has six Vortex Maintenance Gates installed in their manufacturing system, with an extra gate on-hand for rotation into their process.
The Titan Maintenance Gate is chosen when harsh, dry bulk materials are being handled. The carbon steel body and frame offer added durability and resistance to wear and abrasion.
Vortex Loading Spouts operate using a four-cable hoist drive system.
These Vortex HDPV2 Gates are used in a double-dump application to preserve aluminum foil quality in a pyrolysis process.
These diverters are installed outdoors in an area where air and electrical are not readily available. For this reason, chain wheel actuation was selected for this application.
Multiple gates were ordered and are being used to meter different colors of sand onto a conveyor belt before they are transported to a blending process.
These Vortex Roller Gates are installed on a H&H Design Series 2000 Bulk Bag Discharge System. The gates are used to control flow into the flex augers.
Now 15 years later, this bird seed processor’s Seal Tite Diverters are still in service, and the client is just as pleased with their performance.
Application: Gates beneath screw conveyors in a new processing facility.
Diverter modified for sanitary application made of 304 stainless steel with an internal 32 Ra finish. It is actuated by a special stainless steel air cylinder that contains internal position switches.
With a requirement to handle abrasive dust and sticky particulates and a system temperature up to 350 C, the Vortex TPV incorporates cast ductile iron flanges with a hardened 440C stainless steel.
This Vortex 3-way Pivoting Chute Diverter features chromium carbide wetted parts to protect the interior from extreme, abrasion and wear.
